We are all about ...
adjective ~ the quality of being cute, or items that are cute.
This listing is for 200g of 2 part Clear Epoxy Resin.
Instructions for 2 Part Epoxy Resin
Epoxy resin comes in two parts: a resin (150g) and a hardener (50g). Mixing the resin and hardener together prompts a chemical reaction,
transforming them from a liquid into a solid. Measuring accurately and mixing thoroughly is essential to making sure your epoxy resin cures properly.
Step 1: Measure accurately epoxy resin 3A : 1B, meaning that it requires 3 part epoxy and 1 part hardener in order to catalyze and cure. Adding too much of either epoxy or hardener will alter the chemical reaction and the mixture will not cure properly.
For example 15g A to 5g B or 2 fl. oz A to 6 fl. oz B
Step 2: Slowly mix the epoxy and hardener together for at least 3 whole minutes. Scrape the sides and bottom of the container as you mix. Improperly mixed resin stuck to the sides and bottom won't be able to catalyze and therefore won't be able to cure, leaving sticky spots in your resin that just won’t harden.
Step 3: Cast and pour. If bubbles appear eliminate them after you've poured and spread the resin. A heat gun is very effective in popping surface bubbles by a quick pass over the area.
Step 4: Let your resin piece sit, covered to cure for at least 24hrs. After allowing your resin to fully cure remove it from your mold.
** Remember to always practice safety first. Wear gloves and eye wear when dealing with uncured resin. Always wash your hand thoroughly with soap after use. Keep out of reach of children and pets. **
- Resin will initially be a very thin viscosity which is perfect for casting thicker resin pieces.
Letting the resin sit for 10 mins after mixing the A + B parts lets the bubbles rise to the surface and pop easily.
- For doming, let the resin sit for 1-3 hrs to thicken to your liking. Thinner resin is harder to retain surface tension.
- You may layer your resin by letting layers semi cure between pours.
- Be creative by adding glitters, powders, resin dyes and much more!
Check out our Policies if you have any questions about ordering. https://www.etsy.com/shop/CrunchySushiDay/policy?ref=shopinfo_policies_leftnav
~**~**~ Need More Mold Tools? ~**~**~
Make sure to check out our Resin Tools section for even more crafting needs.
3-5 business days
I'll do my best to meet these shipping estimates, but can't guarantee them. Actual delivery time will depend on the shipping method you choose.
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.
Just contact me within: 3 days of delivery
Ship items back to me within: 7 days of delivery
Request a cancellation within: 24 hours of purchase
But please contact me if you have any problems with your order.
Because of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
Please contact me if you have any problems with your order.
Yes absolutely! I take custom orders for clay charms as well as custom digital files. Turn around times may vary depending on my workload. Just send me a quick message and I will give you a price quote and an estimated turn around time.
No, but they are not unbreakable. I use professional grade polymer clay and reinforce all my charms with armature wire and liquid clay. This gives them a good base and fuses all parts together. With that being said they are durable against accidental drops on the ground and normal wear and tear. Treat them as fine jewelry.
I do not recommend them for smaller children under the age 6. Small parts can be chewed off and can cause a choking hazard.
All our digital files are sent in 2 forms, JPEG and PDF. They are both 300dpi hi-resolution files. The main difference between the 2 formats is how the file is saved.
For printing purposes PDF files are great for printing at home as well as printing at a print shop. Our PDF files are formatted to be printed on a standard 8.5'' x 11'' sheet of paper. The setback is PDF files are NOT editable. Meaning, if the print shop or you needs to resize the document, most commonly bigger to account for bleeds when printing, this must be done with a JPEG file.
JPEG's are basically photo files, perfect for sharing on social media and also text messaging. They can be opened in editing software to be resized and formatted to your preference.
You can print your files at home from any printer or take your files/upload them to a local print shop. I recommend using white card stock. If you are printing at home double check your paper is the right kind paper. Paper is specifically made for either inkjet or laser printers. This prevents paper jams and also delivers the best print quality.
I also recommend always doing a print test if you are printing at home before you print a batch out. Also if you ever have a problem with the quality of prints you receive from a print shop do not hesitate to ask for them to be reprinted. Sometimes sizing may be off or their color settings may need to be adjusted. It happens and print shops are more than happy to reprint for you.
Apr 24, 2019
Haven't tried this yet, came in a vacuumed sealed pack that secured it. Super excited to try it out!
Apr 17, 2019
Apr 15, 2019
So awesome! I cannot wait until the rest of my supplies get here so I can start creating cool things! Thanks for hooking me up with my first resin making tools with the cutest packaging and most thoughtful touches ever! Wonderful seller 😍
Apr 12, 2019
Shipped and arrived on time and was super easy to use! plus the goodie bag that came with it was super cute (:
Apr 9, 2019
New to resin art and this kit made it so easy to navigate it!